The RAD-Comet2

Dual 10BASE-T1S and 100/1000BASE-T1 Network Interfaces

Contents:

• 1. Safety and Other Important Notices
• 2. Introduction and Overview
  • 2.1. RAD-Comet Variants
  • 2.2. Package Contents
  • 2.3. Device Overview
  • 2.4. Operational Overview and Use Cases
  • 2.5. Hardware Requirements
• 3. A Tour of RAD-Comet2 Hardware
  • 3.1. Label and Status Indicators
  • 3.2. Bootloader Mode
  • 3.3. Connector Interfaces
• 4. Software Setup
  • 4.1. Vehicle Spy
  • 4.2. Intrepid’s Open Source API (libicsneo)
• 5. ICS Device Manager
  • 5.1. Starting and Using ICS Device Manager
  • 5.2. Using ICS Device Manager
  • 5.3. Firmware Updates
  • 5.4. RTC
  • 5.5. Network Enables
  • 5.6. CAN Network Settings
  • 5.7. LIN Network Settings
  • 5.8. ISO 9141 / Keyword 2000 / K-Line
  • 5.9. Ethernet Tap Configurations
  • 5.10. PHY Configurations
  • 5.11. ISO 15765-2
  • 5.12. gPTP Time Synchronization
  • 5.13. Performance Tests
  • 5.14. Reporting
• 6. The neoVI Explorer Configuration Utility (Legacy)
  • 6.1. Starting and Using neoVI Explorer
  • 6.2. Interfacing with a device
  • 6.3. System Settings and Firmware Updates
  • 6.4. General Settings and Product Details
  • 6.5. CAN Network Settings (legacy)
  • 6.6. LIN Network Settings (legacy)
  • 6.7. Ethernet Tap & Media Converter Configurations (legacy)
  • 6.8. PHY Configurations
  • 6.9. gPTP Time Synchronization (legacy)
  • 6.10. ICS Time Sync (legacy)
  • 6.11. Reporting (legacy)
  • 6.12. Network Enables (legacy)
  • 6.13. Performance Tests (legacy)
  • 6.14. ISO 15765-2 (legacy)
• 7. Core Features
  • 7.1. Interfacing with Vehicle Networks using Vehicle Spy
  • 7.2. CoreMini
• 8. Advanced Features
  • 8.1. MACsec
  • 8.2. Device Register Access
  • 8.3. TC10 - Automotive Ethernet Sleep/Wake-up
• 9. Technical Specifications
  • 9.1. Ethernet Hardware Time Stamping
• 10. Errata
• 11. Support Contact Information
  • 11.1. USA Headquarters
  • 11.2. ICS International Offices