3. Device Overview

3.1. Product Features

Dual coax GMSL2 inputs and outputs
Extend working range of Coax SerDes link
Split single camera into multiple outputs
Aggregate multiple cameras onto a single output
LED indicators for link status, errors, and power
Color Bar Pattern Generator capable
Validate cable and physical link integrity using margin analysis tests
User accessible configuration switches for I2C addresses and link modes
Power over Coax PoC via Coax input from customer Deserializer
Power over coax Injector via 2 pin input voltage barrel jack
GPIO mapped between deserializer and serializer
Automotive Voltage Range Operation (6V-40V)
Compact design: 3.840” x 2.488” x 1.265”.
Rugged aluminum enclosure with rubber bumpers for durability
Light weight: less than 1 lb. (0.45 kg).

3.2. Interfaces

2x FAKRA coax GMSL2 deserializer ports
2x FAKRA coax GMSL2 serializer ports
1x External 3.3V I2C bus header

3.3. Operational Overview and Use Cases

The following section will outline some of the more common use cases, however it should not be interpreted as a complete list of the device’s full capabilities.

3.3.1. Single Repeater

For Usage Case Example: Please contact Intrepid Controls for register settings.

3.3.2. Dual Video Stream Aggregator

For Usage Case Example: Please contact Intrepid Controls for register settings.

3.3.3. Single Video Stream Splitter

For Usage Case Example: Please contact Intrepid Controls for register settings.

3.3.4. Dual Video Stream Splitter/Aggregator

For Usage Case Example: Please contact Intrepid Controls for register settings.

3.3.5. Virtual Cable Tester, Vendor Application

For Usage Case Example: Please contact Intrepid Controls for register settings.