Buy RAD-Star 2

RAD-Star 2

Active Tap, Media Converter and Network Interface for Automotive Ethernet and CAN FD

Contents:

• 1. Safety and Other Important Notices
• 2. Introduction and Overview
  • 2.1. Introduction
  • 2.2. Package Contents
  • 2.3. Operational Overview
  • 2.4. Block Diagram
  • 2.5. Summary of Key Features
  • 2.6. Hardware and Software Requirements
• 3. A Tour of RAD-Star 2 Hardware
  • 3.1. Case and Overall Design
  • 3.2. Membrane LED Display and Keypad
  • 3.3. Vehicle Network Interface Side Connectors
  • 3.4. PC Interface Side Connectors
  • 3.5. Included Cables and Cable Assembly
• 4. Hardware and Software Setup
  • 4.1. Vehicle Spy and Driver Installation and Setup
  • 4.2. Driver and API Support File Installation and Setup
  • 4.3. Hardware Hookup Diagrams
  • 4.4. Vehicle Network and Power Connections
  • 4.5. PC Connection
• 5. The neoVI Explorer Configuration Utility
  • 5.1. Starting and Using neoVI Explorer
  • 5.2. Interfacing with a device
  • 5.3. System Settings and Firmware Updates
  • 5.4. General Settings and Product Details
  • 5.5. CAN Network Settings
  • 5.6. Ethernet Port Configurations
  • 5.7. PHY Configurations
  • 5.8. gPTP Time Synchronization
  • 5.9. ICS Time Sync
  • 5.10. Reporting
  • 5.11. Network Enables
  • 5.12. Performance Tests
• 6. Reference: Connector Pinouts
  • 6.1. BroadR-Reach Nano MQS Connector Pinout
  • 6.2. DB-9 Conventional Network Interface Connector Pinout
• 7. Technical Specifications
  • 7.1. RAD-Star 2 Technical-Specifications
• 8. Support Contact Information
  • 8.1. USA Headquarters
  • 8.2. ICS International Offices
• Buy Now